AUTOCERA-R
Budget-friendly, compact design specially for research and development.<br/><br/> <span class="title">Build Volume:</span><br/>96×54×100mm<br/> <span class="title">Exposure Resolution:</span><br/>1920×1080 (50μm)<br/> <span class="title">Wavelength:</span><br/>405nm<br/> <span class="title">Maximum Exposure Power:</span><br/>Not less than 30mW/cm²
Industrial-grade equipment, stable performance, compact size, good repeatability, reducing test deviation.
New material development module, quickly determine printing parameters, super material-saving.
7 optional functions for smoother and smarter printing.
Printer performance
| Device dimensions: | 450×360×830mm (L×W×H) |
| Printing range: | 96×54×100mm (X×Y×Z) |
| Exposure resolution: | 1920×1080 (35μm) |
| Printing speed: | Z>200 layers/h |
| Total weight of the device: | Approximately 75kg |
| Slicing method: | 25/50/100μm |
| Exposure method: | Single-layer one-time surface exposure (DLP) |
| Wavelength: | 405nm |
| Energy: | Maximum power density 30mW/cm² * |
| Power supply: | 200-240VAC 50/60Hz Power consumption <300W |
| Data interface: | Standard USB interface, for USB drive connection, network interface |
| Material spreading speed: | 1mm/s - 150mm/s adjustable |
| Applicable ceramic materials: | Silicon oxide/Aluminum oxide/Silicon nitride/Silicon carbide/Zirconia/Aluminum nitride Hydroxyapatite/Tricalcium phosphate/Bioglass/Art ceramics |
| Screen size: | 16-inch full-color LCD touch screen |
Optional functions
| Slurry development module: | New materials, new parts development. Parameters fully open, interactive R&D process. |
| Layer thickness subdivision: | 10~500μm continuously adjustable, step size 1μm |
| Slurry constant temperature heating: | Room temperature ~ 65℃ |
| Multiple exposure methods: | Regional exposure to address material shrinkage effects |
| Multiple scrapers: | Adapted for different slurry properties and compositions |
| Remote monitoring: | Dual camera recording + AI defect recognition app remote control |
| Feeding system: | Automatically completes feeding, or gradient material printing |
Headquarter: Beijing Ten Dimensions Technology Co., Ltd.
Printing Service Factory: Ten Dimensions (Guangdong) Technology Co., Ltd.
E-mail: inquiry@10dim.com
Ten Dimensions Technology. All rights reserved